2003 Hyundai Accent Owner's Manual - Page 35

1- 22 FEATURES OF YOUR HYUNDAI B230D03E-AAT For vehicles with adjustable headrests, route the tether strap under the headrest and between the headrest posts, otherwise route the tether strap over the top of the seatback. 3. Connect the tether strap hook to the child restraint hook holder and tighten to secure the seat. Covering Shelf Securing the Child Restraint Seat with the "ISOFIX" System B230E03A-AAT Installing a Child Restraint Seat with the "Tether Anchorage" System (3 Door) Three child restraint hook holders are located on the vertical back panel. (behind rear bumper bar) B230D01A To install the child restraint seat 1. Route the child restraint seat strap over the seatback. For vehicles with adjustable headrests, route the tether strap under the headrest and between the headrest posts, otherwise route the tether strap over the top of the seatback. Tether Strap Hook Back Panel Front of Vehicle B230E03A-1 2. Remove the blanking covers on the covering shelf. 3. Connect the tether strap hook to the child restraint hook holder through the hole on the covering shelf and tighten to secure the seat. Some child seat manufacturers make safety seats that are labeled as ISOFIX or ISOFIXcompatible child seats. These seats include two rigid or webbing mounted attachments that connect to two ISOFIX anchors at specific seating positions in your vehicle. This type of child seat eliminates the need to use seat belts to attach the child seat for forward-facing child seats. ISOFIX anchors have been provided in your vehicle. The ISOFIX anchors are located in the left and right outboard rear seating positions. Their locations are shown in the illustration. There is no ISOFIX anchor provided for the center rear seating position.