2003 Hyundai Accent Owner's Manual - Page 54

FEATURES OF YOUR HYUNDAI B340C03A-AAT B340D01A-AAT B350A01A-AAT 1- 41 WASHER Headlight Switch High-Beam Switch To turn on the headlight high beams, push the lever forward (away from you). The High Beam Indicator Light will come on at the same time. For low beams, pull the lever back toward you. WINDSHIELD SWITCH WIPER AND B340E01A-AAT Headlight Flasher HLC2069 To operate the headlights, turn the barrel on the end of the multi-function switch. The first position turns on the parking lights, sidelights, tail lights and instrument panel lights. The second position turns on the headlights. HLC2073 The windshield wiper switch has three positions: 1. Intermittent wiper operation 2. Low-speed operation 3. High-speed operation HLC2071 NOTE: The ignition must be in the "ON" position to turn on the headlights. To flash the headlights, pull the switch lever toward you, then release it. The headlights can be flashed even though the headlight switch is in the "OFF" position. NOTE: To prevent damage to the wiper system, do not attempt to wipe away heavy accumulations of snow or ice. Accumulated snow and ice should be removed manually. If there is only a light layer of snow or ice, operate the heater in the defrost mode to melt the snow or ice before using the wiper. Parking light auto cut If you do not turn the parking lights "OFF" after driving, the parking lights will automatically shut "OFF" when the driver's door is opened. To turn them "ON" again you must simply turn the ignition key to the "ON" position.