2003 Hyundai Elantra Owner's Manual - Page 15

FEATURES OF YOUR HYUNDAI B070E02HP-GAT Replacing the battery When the transmitter's battery begins to get weak, it may take several pushes on the button to lock or unlock the doors, and the LED will not light. Replace the battery as soon as possible. Battery type : CR2032 Replacement instructions: Case To raise or lower the window, turn the window regulator handle clockwise or counterclockwise. WARNING: When opening or closing the windows, make sure your passenger's arms, hands and body are safely out of the way. Battery MSO-0048-2 B060A01E-AAT POWER WINDOWS (If Installed) Close Open 2. Remove the old battery from the case and note the polarity. Make sure the polarity of the new battery is the same(+side facing down), then insert it in the transmitter. Screwdriver B050A01A-AAT (1) WINDOW GLASS MSO-0048-1 1. Separate the case with a blade screwdriver as shown in the illustration. B060A01E B050A01E The power windows operate when the ignition key is in the "ON" position. The main switches are located on the driver's armrest and control the front and rear windows on both sides of the vehicle. The windows may be opened by depressing the appropriate window switch and closed by pulling up the switch. To open the window on the driver's side, press the switch(1) down. The window moves as long as the switch is operated. 1- 6