2003 Hyundai Elantra Owner's Manual - Page 62

FEATURES OF YOUR HYUNDAI freeways, tollroads, or other noncongested highways. This system is designed to function above approximately 25 mph (40 km/h). B660B01E-AAT WARNING: To avoid accidental cruise control engagement, keep the cruise control main switch off when not using the cruise control. B660D01E-AAT To Resume the Preset Speed To Set the Cruise Speed B660C02E-AAT To Cancel the Cruise Speed B660D01E B660B01E 1. Push in the cruise control main switch on the end of the barrel. The "CRUISE" indicator light in the instrument cluster will be illuminated. This turns the system on. 2. Accelerate to the desired cruising speed above 25 mph (40 km/h). 3. Push the control switch downward to "SET (COAST)" and release it. 4. Remove your foot from the accelerator pedal and the desired speed will automatically be maintained. 5. To increase speed, depress the accelerator pedal enough for the vehicle to exceed the preset speed. When you remove your foot from the accelerator pedal, the vehicle will return to the speed you have set. The vehicle will automatically resume the speed set prior to cancellation when you push the control switch upward to "RESUME (ACCEL)" position and release it, providing the vehicle speed is above 25 mph (40 km/h). B660C01E Do one of the following: o Pull the control switch toward the steering wheel to "CANCEL" position. o Depress the brake pedal. o Depress the clutch pedal (Manual transaxle). o Shift the selector lever to "N" position (Automatic transaxle). o Decrease the vehicle speed lower than the memorized speed by 12 mph (20 km/h). o Decrease the vehicle speed to less than 25 mph (40 km/h). o Release the main switch. B660E01E-AAT To Reset at a Faster Speed 1. Push the control switch upward to "RESUME (ACCEL)" position and hold it. 2. Accelerate to desired speed and release the control switch. While the control switch is held, the vehicle will gradually gain speed. 1- 53