2003 Hyundai Elantra Owner's Manual - Page 68

FEATURES OF YOUR HYUNDAI B740B01S-AAT Air Conditioning Operation Cooling o Adjust the fan control to the desired speed. For greater cooling, turn the fan control to one of the higher speeds or temporarily select the "Recirculation" position on the air intake control. B740C01S-AAT B740D01A-AAT Operation Tips o If the interior of the car is hot when you first get in, open the windows for a few minutes to expel the hot air. o When you are using the air conditioning system, keep all windows closed to keep hot air out. o When moving slowly, as in heavy traffic, shift to a lower gear. This increases engine speed, which in turn increases the speed of the air conditioning compressor. o On steep grades, turn the air conditioning off to avoid the possibility of the engine over-heating. o During winter months or in periods when the air conditioning is not used regularly, run the air conditioning once every month for a few minutes. This will help circulate the lubricants and keep your system in peak operating condition. Dehumidified Heating B740B01E To use the air conditioning to cool the interior: o Set the side vent control to "OFF", to shut off outside air entry. o Turn on the fan control switch. o Turn on the air conditioning switch by pushing in on the switch. The air conditioning indicator light should come on at the same time. o Set the air intake control to "Fresh" mode ( ). o Set the temperature control to "Cool". ("Cool" provides maximum cooling. The temperature may be moderated by moving the control toward "Warm".) B740C01E For dehumidified heating: o Turn on the fan control switch. o Turn on the air conditioning switch. The air conditioning indicator light should come on at the same time. o Set the air intake control to "Fresh" mode ( ). o Set the air flow control to "Face". o Adjust the fan control to the desired speed. o For more rapid action, set the fan at one of the higher speeds. o Adjust the temperature control to provide the desired amount of warmth. 1- 59