2003 Hyundai Elantra Owner's Manual - Page 72

FEATURES OF YOUR HYUNDAI B980C02E-GAT Air Intake Control Switch (With A.Q.S) (If Installed) Exhaust gas cutoff mode : Air enters the vehicle from the outside. But if exhaust gas enters the vehicle from the outside, the exhaust gas cutoff mode ( ) is automatically converted to the ( ) mode, to prevent exhaust gas from entering the vehicle. CAUTION: If the windows fog up with the Recirculation or A.Q.S mode selected, set the air intake control to the Fresh air position or A.Q.S control to "OFF". B980D01Y-AAT NOTE: o It should be noted that prolonged operation of the heating system in recirculation mode ( ) will give rise to misting of the winds-hield and side windows and the air within the passenger compartment will become stale. In addition, prolonged use of the air conditioning with the recirculation mode ( ) selected may result in the air within the passenger compartment becoming excessively dry. o When the ignition switch is turned "ON", the air intake control will change to ( ) mode (regardless of switch position). This is normal operation. The air intake control operates in "AUTO" mode when turning the ignition to the "ON" position if the "AUTO" mode was used before shutting off the engine. Heating and Cooling System Off Press the "OFF" button to stop the operation of the heating and cooling system. B980E01E-AAT Air Flow Control HXD118H This is used to select fresh outside air or recirculate inside air automatically. : OFF : ON Fresh mode : Air enters the vehicle from the outside and is heated or cooled according to the function selected. Recirculation mode : Air from within the passenger compartment will be drawn through the heating system and heated or cooled according to the function selected. B980E01E This is used to direct the flow of air. Air can be directed to the floor, dashboard outlets, or windshield. Four symbols are used to represent Face, Bi-Level, Floor and Floor-Defrost air position. 1- 63