2003 Hyundai Santa Fe Owner's Manual - Page 40

1- 28 FEATURES OF YOUR HYUNDAI B180B01A-AAT Pre-tensioner Seat Belt Your Hyundai vehicle is equipped with driver's and front passenger's pre-tensioner seat belts. The purpose of the pre-tensioner is to make sure that the seat belts fit tightly against the occupant's body in certain frontal collisions. The pre-tensioner seat belts can be activated with the airbags. 2 Driver's airbag 1 Passenger's airbag NOTE: o Both the driver's and front passenger's pre-tensioner seat belts will be activated in certain frontal collisions. The pretensioner seat belts can be activated with the airbags. The pre-tensioners will be activated even if the seat belts are not being worn at the time of the collision. o When the pre-tensioner seat belts are activated, a loud noise may be heard and fine dust, which may appear to be smoke, may be visible in the passenger compartment. These are normal operating conditions and are not hazardous. o Although it is harmless, the fine dust may cause skin irritation and should not be breathed for prolonged periods. Wash your hands and face thoroughly after an accident in which the pre-tensioner seat belts were activated. 3 B180B02S The seat belt pre-tensioner system consists mainly of the following components. Their locations are shown in the illustration. 1. SRS airbag warning light 2. Seat belt pre-tensioner assembly 3. SRS control module B180B01S The pre-tensioner seat belt operates in a similar way as an Emergency Locking Retractor (ELR) type of seat belt. When the vehicle stops suddenly, or if the occupant tries to lean forward too quickly, the seat belt retractor will lock into position. However, in certain frontal collisions, the pre-tensioner will activate and pull the seat belt into tighter contact against the occupant's body. ! WARNING: To obtain maximum benefit from a pretensioner seat belt: 1. The seat belt must be worn correctly. 2. The seat belt must be adjusted to the correct position.