2003 Hyundai Tiburon Owner's Manual - Page 25

2003 Hyundai Tiburon Manual

Page 25 highlights

FEATURES OF YOUR HYUNDAI B180B01GK-GAT ISOFIX Anchor ISOFIX Anchor Position Indicator Pre-tensioner Seat Belt (If Installed) Your Hyundai vehicle is equipped with driver's and front passenger's pre-tensioner seat belts. The purpose of the pre-tensioner is to make sure that the seat belts fit tightly against the occupant's body in certain frontal collisions. The pre-tensioner seat belts can be activated alone or, where the frontal collision is severe enough, together with the airbags. Driver's airbag 1 Passenger's airbag 2 3 B180B01GK B230D02GK The ISOFIX anchors are located between the seatback and the seat cushion of the rear seat left and right outboard seating positions. Follow the child seat manufacturer's instructions to properly install child restraint seats with ISOFIX or ISOFIX-compatible attachments. Once you have installed the ISOFIX child restraint, assure that the seat is properly attached to the ISOFIX and tether anchors. Also, test the child restraint seat before you place the child in it. Tilt the seat from side to side. Also try to tug the seat forward. Check to see if the anchors hold the seat in place. The seat belt pre-tensioner system consists mainly of the following components. Their locations are shown in the illustration. 1. SRS airbag warning light 2. Seat belt pre-tensioner assembly 3. SRS control module WARNING: B180B01S WARNING: If the child restraint is not anchored properly, the risk of a child being seriously injured or killed in a collision greatly increases. The pre-tensioner seat belt operates in the same way as an Emergency Locking Retractor (ELR) type of seat belt. When the vehicle stops suddenly, or if the occupant tries to lean forward too quickly, the seat belt retractor will lock into position. However, in certain frontal collisions, the pre-tensioner will activate and pull the seat belt into tighter contact against the occupant's body. To obtain maximum benefit from a pretensioner seat belt: 1. The seat belt must be worn correctly. 2. The seat belt must be adjusted to the correct position. 1- 17

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.