2003 Hyundai Tiburon Owner's Manual - Page 52

FEATURES OF YOUR HYUNDAI o Don't put an additional floor mat on the top of the anchored mat, otherwise the additional mat may slide forward and interfere with the movement of the pedals. B660B01E-AAT To Set the Cruise Speed WARNING: To avoid accidental cruise control engagement, keep the cruise control main switch off when not using the cruise control B660C02E-AAT B660A01S-AAT CRUISE CONTROL (If Installed) To Cancel the Cruise Speed B660B01GK Main switch B660A01GK The cruise control system provides automatic speed control for your comfort when driving on freeways, tollroads, or other noncongested highways. This system is designed to function above approximately 25 mph (40 km/h). 1. Push in the cruise control main switch on the end of the barrel. The "CRUISE" indicator light in the instrument cluster will be illuminated. This turns the system on. 2. Accelerate to the desired cruising speed above 25 mph (40 km/h). 3. Push the control switch downward to "SET (COAST)" and release it. 4. Remove your foot from the accelerator pedal and the desired speed will automatically be maintained. 5. To increase speed, depress the accelerator pedal enough for the vehicle to exceed the preset speed. When you remove your foot from the accelerator pedal, the vehicle will return to the speed you have set. B660C01GK Do one of the following: o Pull the control switch toward the steering wheel to "CANCEL" position. o Depress the brake pedal. o Depress the clutch pedal (Manual transaxle). o Shift the selector lever to "N" position (Automatic transaxle). o Decrease the vehicle speed lower than the memorized speed by 12 mph (20 km/h). o Decrease the vehicle speed to less than 25 mph (40 km/h). o Release the main switch. 1- 44