2004 Hyundai Elantra Owner's Manual - Page 40

FEATURES OF YOUR HYUNDAI 1 29 B230D03E-AAT Securing the child Restraint seat with the "ISOFIX" system There is no ISOFIX anchor provided for the center rear seating position. ! ISOFIX Anchor ISOFIX Anchor Position Indicator WARNING: B230F01E Some child seat manufacturers make safety seats that are labeled as ISOFIX or ISOFIXcompatible child seats. These seats include two rigid or webbing mounted attachments that connect to two ISOFIX anchors at specific seating positions in your vehicle. This type of child seat eliminates the need to use seat belts to attach the child seat for forward-facing child seats. ISOFIX anchors have been provided in your vehicle. The ISOFIX anchors are located in the left and right outboard rear seating positions. Their locations are shown in the illustration. o Do not install a child safety seat at the center of the rear seat using the vehicle's ISOFIX anchors. The ISOFIX anchors are only provided for the left and right outboard rear seating positions. Do not misuse the ISOFIX anchors by attempting to attach a child sefety seat in the middle of the rear seat position to the ISOFIX anchors. In a crash, the child seat ISOFIX attachments may not be strong enough to secure the child restraint seat properly in the center of the rear seat and may break, causing serious injury or death. o Do not mount more than one child restraint to a single tether or to a child restraint lower anchorage point. the improper increased load may cause the anchorage points or tether anchor to break, causing serious injury or death. o Attach the ISOFIX or ISOFIX-compatible child seat only to the appropriate locations shown. o Always follow the installation and use instructions provided by the manufacturer of the child restraint. B230D02E The ISOFIX anchors are located between the seatback and the seat cushion of the rear seat left and right outboard seating positions. Follow the child seat manufacturer's instructions to properly install safety seats with ISOFIX or ISOFIX-compatible attachments. Once you have installed the ISOFIX child restraint seat, assure that the seat is properly attached to the ISOFIX and tether anchors. Also, test the safety seat before you place the child in it. Tilt the seat from side to side. Also try to tug the seat forward. Check to see if the anchors hold the seat in place.