2005 Hyundai Elantra Owner's Manual - Page 173

3 WHAT TO DO IN AN EMERGENCY 8 D060E01A-AAT D060F03E-AAT 4. Put the Jack in Place 5. Raising the Vehicle Raise the car high enough so that the fully inflated spare tire can be installed. To do this, you will need more ground clearance than is required to remove the flat tire. Wrench bar Wheel nut wrench D060W01E HFC4022 The base of the jack should be placed on firm, level ground. The jack should be positioned as shown in the drawing. After inserting a wrench bar into the wheel nut wrench, install the wrench bar into the jack as shown in the drawing. To raise the vehicle, turn the wheel nut wrench clockwise. As the jack begins to raise the vehicle, double check that it is properly positioned and will not slip. If the jack is on soft ground or sand, place a board, brick, flat stone or other object under the base of the jack to keep it from sinking. WARNING: Do not get under the vehicle when it is supported by the jack! This is very dangerous as the vehicle could fall and cause serious injury or death. No one should stay in the vehicle while the jack is being used. !