2005 Hyundai Santa Fe Owner's Manual - Page 143

1 FEATURES OF YOUR HYUNDAI 132 D295D03O-AAT 1. LOAD Button This compact disc playing will accommodate up to six discs. To insert one disc do the following: 1. Turn the ignition on. 2. Press and release the LOAD Button. 3. Wait for the light, located to the right of the slot, to turn green. 4. Load a disc. Insert a disc partway into the slot, label side up. The player will pull the disc in. NOTE: This CD player is suitable only for 12 cm discs, do not use irregular shaped CDs. When the disc is inserted, the CD symbol will be displayed. If you select an EQ setting for your disc, it will be activated each time you play a disc. If the radio is on or off, the disc will begin to play automatically. To inset multiple discs do the followings: 1. Turn the ignition on. 2. Press and hold the LOAD button for two seconds. You will then hear two beeps and the light, located to the right of the slot, will begin to flash. 3. Once the light stops flashing and turns green. Load a disc. Insert a disc partway into the slot, label side up. The player will pull the disc in. Once the disc is loaded, the light will begin flashing again. Once the light stop flashing and turns green you can then load another disc. The disc player takes up to six discs. Do not try to load more than six. When a disc is inserted, the CD symbol will be displayed. If more than one disc has been loaded, number for each disc will be displayed. If you select an EQ setting for your disc, it will be activated each time you play a disc. If the radio is on or off, the last disc loaded will begin to play automatically. 4. To load more than one disc but less than six, complete Steps 1, 2 and 3. When you have finished loading discs, with the radio on or off, press LOAD to cancel the loading function. The radio will begin to play the last CD loaded. As each new track starts to play, the track number will appear on the display. A small bar will appear under the CD number that is playing, it could be due to one of the following conditions: o The road is too rough. The disc should play when the road is smoother. o The disc is dirty, scratched, wet or upside down. o The air is very humid. If so, wait about an hour and try again. If any error occurs repeatedly or if an error can't be corrected, please contact your dealer. If your radio displays an error message, write it down and provide it to your dealer when reporting the problem. 2. CD EJECT Button This button will eject a disc or discs, if you have multiple discs loaded. To eject a disc or discs from the disc player perform one of the following steps: o Press and release the eject button to eject the disc that is currently playing. o To eject all of the discs, press this button for two seconds, you will hear three beeps, and the light will flash to let you know when a disc is being ejected. Playing a Specific Loaded CD For every CD loaded, a number will appear on the radio display. To play a specific CD, first press the CD select button to start playing a CD. Then press the numbered button that corresponds to the CD you want to play.