2005 Hyundai Santa Fe Owner's Manual - Page 180

2 DRIVING YOUR HYUNDAI 30 C190G02JM-AAT Compliance Label This label also tells you the maximum weights that can be supported by the front and rear axles, called Gross Axle Weight Rating (GAWR). To find out the actual loads on your front and rear axles, you need to go to a weigh station and weigh your vehicle. Your dealer can help you with this. Be sure to spread out your load equally on the left and right sides of the centerline. C190G01JM The compliance label is located on the driver's side of the center pillar outer panel. The label shows the size of your original tires and the inflation pressures needed to obtain the gross weight capacity of your vehicle. This is called the GVWR (Gross Vehicle Weight Rating). The GVWR includes the weight of the vehicle, all occupants, fuel and cargo. WARNING: o Never exceed the GVWR for your vehicle or the GAWR for either the front or rear axle. o Do not load your vehicle any heavier than the GVWR or either the maximum front or rear GAWR. If you do, parts on your vehicle can break, and it can change the way your vehicle handles. This could cause you to lose control and crash. Also, overloading can shorten the life of your vehicle. ! WARNING: o Overloading your vehicle can cause heat buildup in your vehicle's tires and possible tire failure that could lead to a crash. o Overloading your vehicle can cause increased stopping distances that could lead to a crash. o A crash resulting from poor handling vehicle damage, tire failure, or increased stopping distances could result in serious injury or death. !