2005 Hyundai Santa Fe Owner's Manual - Page 29

1FEATURES OF YOUR HYUNDAI 18 Hanger Buckle clips ! WARNING: Securing loop HSM293-A B080D02O NOTE: o Before folding the seatback, place the rear seat belt buckles in the buckle clips on the seatback. This will prevent the seat belt buckles from becoming covered by the seat cushion when it is returned to the seating position. o The rear seat belt buckles must be removed from the buckle clips by pressing release button when in use. 4. Hook the securing loop under the seat cushion to the hanger on the backside of the seatback. 5. Insert the headrests between the seatback and the seat cushion. 6. To return the seatback to its normal position, push the seatback folding lever and reverse the above procedure. o When you return the seatback to its upright position, always be sure it is locked into position by pulling and pushing on the top of the seatback. o When folding down or returning the seatback, always hold the seatback. Otherwise, the seatback could move suddenly and result in unexpected injury. o The purpose of the fold-up rear seat cushion and the fold-down rear seat back is to allow you to carry larger items than could otherwise be accommodated. Never allow passengers to sit on the cargo area while the car is moving. This is not a proper seating position and no seat belts are available for use when the seat back is folded down. This could result in serious injury or death in case of an accident or a sudden stop. Objects should not extend higher than the top of the front seatbacks. This could allow cargo to slide forward and cause injury or damage during sudden stops. o Make sure that the headrests are properly fixed in place to minimize the risk of severe injury in case of an accident.