2006 Hyundai Tiburon Owner's Manual - Page 215

DO-IT-YOURSELF MAINTENANCE 6 21 CHECKING BRAKE PEDAL CLEARANCE G180A01A-AAT CHECKING DRIVE BELTS G190A01A-AAT 2.0L A/C comp. Water pump pulley Power steering 1.78 in. (45.1 mm) Drive belts should be checked periodically for proper tension and adjusted if necessary. At the same time, belts should be examined for cracks, wear, fraying or other evidence of deterioration and replaced if necessary. Belt routing should also be checked to be sure there is no interference between the belts and other parts of the engine. After a belt is replaced, the new belt should be adjusted again after two or three weeks to eliminate slack resulting from initial stretching after use. Generator Tension pulley G180A01L Crankshaft pulley G190A01GK You need a helper to check the brake pedal clearance. With the engine running, have your helper press down on the brake pedal several times and then hold it down with a force of about 110 lbs (50 kg, 490 N). The brake pedal clearance is the distance from the top surface of the brake pedal to the asphalt sheeting under the floor mat. If the brake pedal clearance is not within the limits specified in the illustration, have it inspected by your Hyundai dealer and adjusted or repaired if necessary. 2.7L Auto tensioner Power steering A/C comp. Generator Crankshaft pulley G190A02B