2007 Hyundai Accent Owner's Manual - Page 137

FEATURES OF YOUR HYUNDAI 1 125 125 4. AUTO SEEK Select Button (Automatic Channel Selection) Press the AUTO SEEK select button. side is pressed, the unit will When the automatically tune to the next higher freside is pressed, quency and when the it will automatically tune to the next lower frequency. 7. PRESET STATION Select Buttons Six stations for AM, FM1 and FM2 respectively can be preset in the electronic memory circuit. HOW TO PRESET STATIONS Six AM and twelve FM stations may be programmed into the memory of the radio. Then, by simply pressing the AM / FM select buttons and/or one of the six station select buttons, you may recall any of these stations instantly. To program the stations, follow these steps: o Press AM/FM selector to set the band for AM, FM1 and FM2. o Select the desired station to be stored by seek or manual tuning. o Determine the preset station select button you wish to use to access that station. 5. SCAN Button When you press the button, frequency is changed and the next channel is received automatically. To stay on a station, press the SCAN button again. o Press the station select button for more than two seconds. A select button indicator will show in the display indicating which select button you have depressed. The frequency display will flash after it has been stored into the memory. You should then release the button, and proceed to program the next desired station. A total of 24 stations can be programmed by selecting one AM and two FM station per button. o When completed, any preset station may be recalled by selecting AM, FM1 or FM2 band and the appropriate station button. 6. EQ Button Press the EQ button to select the CLASSIC, POPS, ROCK, JAZZ and OFF MODE for the desired tone quality. Each press of the button changes the display as follows; CLASSIC → POPS → ROCK → JAZZ →DEFEAT ! CAUTION: o Do not place beverages close to the audio system. The audio system mechanism may be damaged if you spill them. o Do not strike or allow anything to impact the audio system, damage to the system mechanisms could occur.