2007 Hyundai Accent Owner's Manual - Page 169

2007 Hyundai Accent Manual

Page 169 highlights

DRIVING YOUR HYUNDAI 2 7 NOTE: o To shift into reverse, rest the lever in neutral for at least 3 seconds after your car is completely stopped. Then move the lever into the reverse position. o During cold weather, shifting may be difficult until the transaxle lubricant has warmed up. This is normal and not harmful to the transaxle. o If you've come to a complete stop and it's hard to shift into 1st or R(Reverse), put the shift lever in N(Neutral) position and release the clutch. Press the clutch pedal back down, and then shift into 1st or R(Reverse) gear position. o Do not use the shift lever as a handrest during driving, as this can result in premature wear of the transaxle shift forks. C070B01A-AAT ! Using the Clutch CAUTION: The clutch should be pressed all the way to the floor before shifting, then released slowly. Do not rest your foot on the clutch pedal while driving. This can cause unnecessary wear. Do not partially engage the clutch to hold the car on an incline. This causes unnecessary wear. Use the parking brake to hold the car on an incline. Do not operate the clutch pedal rapidly and repeatedly. C070E03A-AAT o Do not downshift more than 2 gears or downshift the gear when the engine is running at high speed (5,000 RPM or higher). Such downshifting may damage the engine. o When downshifting from fifth gear to fourth gear, caution should be taken not to inadvertently press the gear shift lever sideways in such a manner that second gear is engaged. Such a drastic downshift may cause the engine speed to increase to the point that the tachometer will enter the red zone. Such over revving of the engine may possibly cause engine damage. RECOMMENDED SHIFT POINTS Shift from-to 1-2 2-3 3-4 4-5 Recommended mph(km/h) 15 (20) 25 (40) 35 (55) 45 (75) The shift points as shown above are recommended for optimum fuel economy and performance.

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.