2007 Hyundai Elantra Owner's Manual - Page 144

Features of your vehicle Manual heating and air conditioning The heating and cooling system can be controlled manually as well by pushing buttons other than the AUTO button. In this case, the system works sequentially according to the order of buttons selected. When pressing any button except AUTO button while automatic operation, the functions of the buttons not selected will be controlled automatically. 1. Start the engine. 2. Set the mode to the desired position. 3. Set the temperature control to the desired position. 4. Set the air intake control to the outside (fresh) air position. 5. Set the fan speed control to the desired speed. 6. If air conditioning is desired, turn the air conditioning system (if equipped) on. Press the AUTO button in order to convert to full automatic control of the system. Face-Level (B, D) Air flow is directed toward the upper body and face. Additionally, each outlet can be controlled to direct the air discharged from the outlet. Bi-Level (B, D, C, E) OHD046068 Mode selection The mode selection button controls the direction of the air flow through the ventilation system. The air flow outlet port is converted as follows: Air flow is discharged towards the face and floor. Floor-Level (C, E, A, D) Most of the air flow is directed to the floor, with a small amount of the air being directed to the windshield and side window defroster. Floor/Defrost-Level (A, C, E, D) Most of the air flow is directed to the floor and the windshield with a small amount directed to the side window defrosters. Refer to the illustration in the "Manual climate control system". 4 71