2007 Hyundai Santa Fe Owner's Manual - Page 147

FEATURES OF YOUR HYUNDAI 1 135 B970C01CM-AAT Automatic Operation Press the "MODE" and "DUAL" switch simultaneously for 3 seconds. The display shows that the unit of temperature is adjusted to Centigrade or Fahrenheit (°C → °F or °F → °C). Photo Sensor OCM052101 OCM052098 The FATC (Full Automatic Temperature Control) system automatically controls heating and cooling by doing as follows: 1. Push the AUTO button. It is indicated by AUTO on the display. The modes, fan speeds, air intake and air-conditioning will be controlled automatically by temperature setting. 2. Turn the "TEMP" knob to set the desired temperature. The temperature will increase to the maximum 90°F (32°C) by turning the knob clockwise. The temperature will decrease to the minimum 62°F (17°C) by turning the knob counterclockwise. OCM052062 NOTE: Never place anything over the sensor which is located on the instrument panel to ensure better control of the heating and cooling system. NOTE: If the battery has been discharged or disconnected, the temperature mode will reset to Centigrade degrees. This is a normal condition and you can change the temperature mode from Centigrade to Fahrenheit as follows;