2007 Hyundai Tucson Owner's Manual - Page 86

1FEATURES OF YOUR HYUNDAI 74 1. To operate Compass feature Press and release the button, then the vehicle's directional heading will be displayed. Pressing and releasing the button again will turn off the display. Heading display - E : East - W : West - S : South - N : North ex) NE : North East 3. Setting the compass zone 1. Find your current location and variance zone number on the zone map. 4. Changing Mirror Angle setting (If Installed): Due to mirror positions being angled towards the driver, the compass mirror can also compensate for drivers seated on the Left Hand side of the vehicle (steering wheel on the LH side of the vehicle) or Right Hand side of the vehicle (steering wheel on the RH side of the vehicle). To adjust the Left Hand, "L" or Right Hand, "R", setting: 1. Press and hold the button for more than 12 seconds. 2. Release then press the button to toggle between "L" and "R". 2. Calibration procedure Press and hold the button for more than 9 but less than 12 seconds. When the compass memory is cleared a "C" will appear in the display. Driving the vehicle in a circle at less than 5mph 2 times or until the compass heading appears. Driving in a circle in right-handed direction and opposite direction are possible, and if the calibration is completed, the compass heading will appear. Keep driving in a circle until a compass heading appears. B520C06JM NOTE: This procedure also causes the compass to be de-calibrated. 3. To re-calibrate the compass, drive the vehicle in 2 complete circles at less than 8km/ h (5mph). 2. Press and hold the button for more than 6 but less than 9 seconds. The current zone number will appear in the display. 3. Press the button until the new zone number appears in the display. After you stop pressing the button in, the display will show a compass direction within a few seconds. -