2008 Hyundai Accent Owner's Manual - Page 88

1 FEATURES OF YOUR HYUNDAI 76 MULTI-FUNCTION LIGHT SWITCH B340A01A-AAT B340B01A-AAT B340C05A-AAT COMBINATION TURN SIGNAL, HEADLIGHT AND LOW-BEAM SWITCH Turn Signal Operation Pulling down on the lever causes the turn signals on the left side of the car to blink. Pushing upward on the lever causes the turn signals on the right side of the car to blink. As the turn is completed, the lever will automatically return to the center position and turn off the turn signals at the same time. If either turn signal indicator light blinks more rapidly than usual, goes on but does not blink, or does not go on at all, there is a malfunction in the system. Check for a burned-out fuse or bulb or see your Hyundai dealer. Lane Change Signal Headlight Switch OTB048095 OTB048090 To indicate a lane change, move the lever up or down to a point where it begins flashing. The lever will automatically return to the center position when released. To operate the headlights, turn the barrel on the end of the multi-function switch. The first position turns on the parking lights, sidelights, tail lights and instrument panel lights. The second position turns on the headlights. NOTE: The ignition must be in the "ON" position to turn on the headlights.