2008 Hyundai Santa Fe Owner's Manual - Page 182

1 FEATURES OF YOUR HYUNDAI 170 3. TUNE Knob Turn the TUNE knob to scroll through the XM channels. This is called manual tuning. Upon reaching the desired channel, press the knob (ENTER) to make a selection. During manual tuning, the audio system plays the current channel audio until a selection is made. If there is no ENTER being pressed 5 seconds after stopped turning the TUNE knob, the manual tune will be canceled. The audio system then reverts the display back to its current channel. When the category search is on, the manual tuning is blinded within the current category. Otherwise, it is done across the categories. 4. Channel Preset buttons (1~6) There are 6 Preset buttons in each XM band you can use to store your favorite XM channels. Saving a channel as a preset gives you one-touch access to the channel you want. Remember that the 6 presets channels you stored are for the specific XM band mode you are in. There are a total of 3 XM bands. That means you can store up to 18 of your favorite channels in the preset memory. Using Presets To save a XM channel as a preset: 1. Take note of the band selection displayed on the LCD screen (XM1, XM2 or XM3) 2. Select a XM channel you want using either the SEEK '∧' and '∨' buttons or the TUNE Knob. 3. Choose the preset button (1 - 6) you want to store that channel. 4. Press and hold the Preset button for more than 2 seconds. The system beeps to indicate that it has saved the new channel and displays the preset number on the LCD screen. NOTE: Remember that if you store a channel as preset 3 in XM2 mode, you must first select XM2 mode before you can use that preset button. NOTE: Saving a new channel erases the previous setting saved in that preset.