2008 Hyundai Santa Fe Owner's Manual - Page 199

FEATURES OF YOUR HYUNDAI 1 187 5. SRC(Source) Button After inserting a disc in the RSE, it will automatically use that as the source and begin playing that disc. The RSE control panel will display "DISC IN" when there is disc loaded in the player. Press the SRC button to select from the various audio and video sources available. All available sources will be displayed on the Source Selection screen. Use the arrow buttons (∧ NEXT /∨ PREV and REW/FF) to navigate to the desired source, and then press ENTER to select the highlighted source. NOTE: When switching from the vehicle radio to the RSE, there is a slight delay while the RSE initializes. The RSE control panel will display "READ" while the disc initializes, then begin playing the disc. The RSE control panel will display "REAR" if the current source is the RSE player, "FRONT" if the current source is the front vehicle radio and "AUX" if the current source is an auxiliary input. 6. Play/Pause Button You do not need to press the PLAY/PAUSE button after loading a disc to begin playing the disc. The player will start playing automatically. While a disc is playing, press to pause. While paused, the elapsed time of the current disc, track or file will blink on the LCD display, and "PAUSE" will be displayed on the RSE control panel. Press the button again to resume play. NOTE: The RSE will enter standby mode when the vehicle ignition is turned off. When the vehicle is turned back on within 30 seconds, the RSE will turn on and the DVD/VCD will automatically begin playing again at the point where it paused. If the vehicle is turned off for longer than 30 seconds, the RSE system will not turn on automatically when the vehicle is restarted. 7. ∧ NEXT / ∨ PREV (Next/Previous) and < REW/FF > (Rewind/Fast Forward) and ENTER Buttons The ∧ NEXT or ∨ PREV and REW/FF buttons provide a variety of functions, depending on the media currently being played in the RSE or the source selected. For some of the functions, you will use these buttons to navigate to the desired location or option, then press the ENTER button in the center to confirm your selection. For specific information about using these buttons, see the appropriate section for the various media types in this manual. While the RSE is selected as the source by the front vehicle radio, the front vehicle radio will be able to control some RSE functions (e.g. Fast Forward / Reverse, Previous / Next Track, etc.). See your vehicle radio user manual for more information.