2008 Hyundai Sonata Owner's Manual - Page 48

1FEATURES OF YOUR HYUNDAI 34 B180B02NF-AAT Pre-tensioner Seat Belt tensioner (which is installed in the buckle) will also pull the seat belt into the buckle. Driver's airbag Passenger's airbag 1 ! CAUTION: Do not put anything near the buckle. Placing objects near the buckle can adversely affect the buckle pre-tensioner and may increase the risk of personal injury in the event of a collision. If the system senses excessive seat belt tension on the driver or passenger's seat belt when the pre-tensioner activates, the load limiter inside the pre-tensioner will release some of the pressure on the affected seat belt. The seat belt pre-tensioner system consists mainly of the following components. Their locations are shown in the illustration: 3 2 B180B01NF-L OMG035300 Your Hyundai vehicle is equipped with driver's and front passenger's pre-tensioner seat belts. The purpose of the pre-tensioner is to make sure that the seat belts fit tightly against the occupant's body in certain frontal collisions. The pre-tensioner seat belts can be activated alone or, where the frontal collision is severe enough, together with the airbags. When the vehicle stops suddenly, or if the occupant tries to lean forward too quickly, the seat belt retractor will lock into position. In certain frontal collisions, the pre-tensioner will activate and pull the seat belt into tighter contact against the occupant's body. The buckle pre- 1. SRS airbag warning light 2. Retractor pre-tensioner assembly 3. SRS control module ! WARNING: To obtain maximum benefit from a pretensioner seat belt: o The seatbelt must be work correctly and adjusted to the proper position (see pages 1-23 and 1-24). Please read and follow all of the important information and precautions about your vehicle's occupant safety features - including seat belts and advanced airbags - that are provided in this manual.