2008 Hyundai Tiburon Owner's Manual - Page 179

WHAT TO DO IN AN EMERGENCY 3 13 D060E01A-AAT D060F02E-AAT 4. Put the Jack in Place 5. Raising the Car Raise the car high enough so that the fully inflated spare tire can be installed. To do this, you will need more ground clearance than is required to remove the flat tire. Wrench bar OGK036401 Wheel nut wrench D060F01MC The base of the jack should be placed on firm, level ground. The jack should be positioned as shown in the drawing. After inserting a bar into the wheel nut wrench, install the bar into the jack as shown in the drawing. To raise the vehicle, turn the jack handle clockwise. As the jack begins to raise the vehicle, double check that it is properly positioned and will not slip. If the jack is on soft ground or sand, place a board, brick, flat stone or other object under the base of the jack to keep it from sinking. WARNING: Do not get under the car when it is supported by the jack! This is very dangerous as the jack could fall and cause serious injury or death. No one should stay in the car while the jack is being used. !