2008 Hyundai Tiburon Owner's Manual - Page 218

6 DO-IT-YOURSELFMAINTENANCE 18 CHECKING AND REPLACING FUSES G200A01GK-AAT G200B02A-AAT Replacing a Fusible Link ! Replacing Accessory Fuse CAUTION: Bad Good When replacing a fusible link, never use anything but a new fusible link with the same or lower amperage rating. Never use a piece of wire or a higher-rated fusible link. This could result in serious damage and create a fire hazard. G200A01E OGK076027 A fusible link will melt if the electrical circuits from the battery are ever overloaded, thus preventing damage to the entire wiring harness. (This could be caused by a short in the system drawing too much current.) If this ever happens, have a Hyundai dealer determine the cause, repair the system and replace the fusible link. The fusible links are located in a relay box(2.0L )or below the positive (+) post cover of the battery (2.7L) for easy inspection. The fuse box for the lights and other electrical accessories will be found low on the dashboard on the driver's side. Inside the box you will find a list showing the circuits protected by each fuse. If any of your car's lights or other electrical accessories stop working, a blown fuse could be the reason. If the fuse has burned out, you will see that the metal strip inside the fuse has burned through. If you suspect a blown fuse, follow this procedure: