2009 Hyundai Elantra Owner's Manual - Page 169

Features of your vehicle 1. Power ON/OFF Button & Volume Control Knob Turns the set on/off when the ignition switch is on ACC or ON. If the button is turned to the right, it increases the volume and left,decreases the volume. 4. Preset Button Push [1]~[6] buttons less than 0.8 second to play the channel saved in each button. Push [PRESET] button for 0.8 second or longer to save current channel to the respective button with a beep. Audio Control Knob In SETUP mode, SCROLL, XM option or TONE, POSITION settings can be adjusted. After selecting each mode by pushing Sound Control knob, rotate the knob to adjust and push again to changes take effect. • SCROLL option When "ON" is selected, long file name scrolls continuously while playing. • TONE adjustment Sound tone(BASS/MIDDLE/TREBLE) can be adjusted by rotating the knob. To select next item, press the knob again. • POSITION adjustment Sound position(FADER/BALANCE) can be adjusted by rotating the knob. FADER adjusts FRONT/REAR position, and BALANCE adjusts LEFT/RIGHT position of the speaker sound. To select next item, press the knob again. • XM option Selects default information of channel displayed in XM mode. Category/Channel or Artist/Title can be selected. 2. AM/FM Selection Button Turns to FM or AM mode, and toggles in the order of FM1 ➟ FM2 ➟ AM ➟ FM1...when the button is pressed each time. 5. Manual Channel Selection Knob & SETUP Button Manual Channel Selection knob Turn this knob while listening to a radio channel to manually adjust frequency. Turn clockwise to increase frequency and counterclockwise to reduce frequency. SETUP Button Press this button to turn to the XM option, SCROLL and adjustment mode. If no action is taken for 5 seconds after pressing the button, it will return to the play mode.(After entering SETUP mode, move between items using the left, right and PUSH functions of the [TUNE] button.) The setup item changes from SCROLL ➟ TONE ➟ POSITION... 3. Automatic Channel Selection Button • When the [SEEK ] button is pressed, it increases the band frequency to automatically select a channel. Stops at the previous frequency if no channel is found. • When the [TRACK ] button is pressed, it reduces the band frequency to automatically select a channel. Stops at the previous frequency if no channel is found. 4 95