2009 Hyundai Sonata Owner's Manual - Page 237

6 DO-IT-YOURSELFMAINTENANCE 22 CHECKING DRIVE BELTS G190A02NF-GAT CHECKING AND REPLACING FUSES Drive belts should be checked periodically for proper tension. At the same time, belts should be examined for cracks, wear, fraying or other evidence of deterioration and replaced if necessary. When a new belt is replaced, the belt should be located within the pulley of flat idler. Belt routing should also be checked to be sure there is no interference between the belts and other parts of the engine. G200A01A-AAT (2.4L) Power steering pump Auto tensioner Replacing a Fusible Link Generator Water pump pully Compressor Damper pulley G140D01NF NOTE: Drive belt tension is adjusted automatically by the auto tensioner. ONF078020 (3.3L) Water pump pully Generator Auto tensioner Power steering A fusible link will melt if the electrical circuits from the battery are ever overloaded, thus preventing damage to the entire wiring harness. (This could be caused by a short in the system drawing too much current.) If this ever happens, have a Hyundai dealer determine the cause, repair the system and replace the fusible link. The fusible links are located in a relay box in the engine compartment for easy inspection. Damper pulley Compressor G140D02NF