2009 Hyundai Sonata Owner's Manual - Page 64

FEATURES OF YOUR HYUNDAI 1 51 B260G01A-AAT B260H02A-AAT NOTE: o You can find the front passenger's seat belt warning light on the center fascia panel. o Although the front passenger seat is not occupied, the seat belt warning light will blink for 6 seconds. o The seat belt warning light can blink when a briefcase or purse is placed on the front passenger seat. B260F01A-AAT Low Oil Pressure Warning Light Parking Brake/Low Brake Fluid Level Warning Light ! CAUTION: ! WARNING: High Beam Indicator Light The high beam indicator light comes on whenever the headlights are switched to the high beam or flash position. B260A01Y-GAT Front Fog Light Indicator Light (If Installed) This fog indicator light comes on when the ignition key is turned to the "ON" position and the front fog light switch is on. If the low oil pressure warning light stays on while the engine is running, serious engine damage may result. The oil pressure warning light comes on whenever there is insufficient oil pressure. In normal operation, it should come on when the ignition switch is turned on, then go out when the engine is started. If the oil pressure warning light stays on while the engine is running, there is a serious malfunction. If this happens, stop the car as soon as it is safe to do so, turn off the engine and check the oil level. If the oil level is low, fill the engine oil to the proper level and start the engine again. If the light stays on with the engine running, turn the engine off immediately. In any instance where the oil light stays on when the engine is running, the engine should be checked by a Hyundai dealer before the car is driven again. If you suspect brake trouble, have your brakes checked by a Hyundai dealer as soon as possible. Driving your car with a problem in either the brake electrical system or brake hydraulic system is dangerous, and could result in a serious injury or death. Warning Light Operation The parking brake/brake fluid level warning light should come on when the parking brake is applied and the ignition switch is turned to "ON" or "START". After the engine is started, the light should go out when the parking brake is released. If the parking brake is not applied, the warning light should come on when the ignition switch is turned to "ON" or "START", then go out when the engine starts. If the light comes on at any other time, you should slow the vehicle and bring it to a complete stop in a safe location off the roadway.