2009 Hyundai Veracruz Owner's Manual - Page 181

Features of your vehicle Adjusting the driver and passenger side temperature equally 1. Press the DUAL button again to deactivate DUAL mode. The passenger side temperature will be set to the same as the driver side temperature. 2. Press the left temperature control button. The driver and passenger side temperature will be adjusted equally. Temperature conversion If the battery has been discharged or disconnected, the temperature mode display will reset to Fahrenheit. This is a normal condition.You can switch the temperature mode between Fahrenheit to Centigrade as follows; While pressing the MODE button, depress the DUAL button for 3 seconds or more. The display will change from Fahrenheit to Centigrade, or from Centigrade to Fahrenheit. OEN046125 OEN046126N D240203AEN Adjusting the driver and passenger side temperature individually 1. Press the DUAL button to operate the driver and passenger side temperature individually. Pressing the right temperature control button will automatically switch to the DUAL mode as well. 2. Press the left temperature control to adjust the driver side temperature. Press the right temperature control to adjust the passenger side temperature. When the driver side temperature is set to the highest (HI) or lowest (Lo) temperature setting, the DUAL mode is deactivated for maximum heating or cooling. Air intake control This is used to select the outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button. 4 100