2009 Hyundai Veracruz Owner's Manual - Page 396

Maintenance OEN076054 OEN076055 OEN076056 Inside light 1. Open the tailgate. 2. Remove the service cover using a flatblade screwdriver. 3. Loosen the light assembly retaining nuts with a wrench. 4. Remove the rear combination light assembly from the body of the vehicle. 5. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 6. Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket. 7. Insert a new bulb by inserting it into the socket and rotating it until it locks into place. 8. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise. 9. Reinstall the light assembly to the body of the vehicle. 10. Install the service cover by putting it into the service hole. 7 56