2010 Hyundai Accent Owner's Manual - Page 76

FEATURES OF YOUR HYUNDAI 1 65 65 D150312AUN B260G01A-AAT B260H03A-AAT Automatic Transaxle Position Indicator Light (If Installed) The indicator displays which automatic transaxle shift position is selected. Low Oil Pressure Warning Light Parking Brake/ Low Brake Fluid Level Warning Light ! CAUTION: Manual Transaxle Shift Indicator (If Installed) This indicator informs you which gear is desired while driving to save fuel. For example: : Indicates that shifting up to the 3rd gear is desired (currently the shift lever is in the 2nd gear). : Indicates that shifting down to the 3rd gear is desired (currently the shift lever is in the 4th gear). NOTE : When the system is not working properly, up & down arrow indicator will blink (Gear is not displayed.). If the oil pressure warning light stays on while the engine is running, serious engine damage may result. The oil pressure warning light comes on whenever there is insufficient oil pressure. In normal operation, it should come on when the ignition switch is turned on, then go out when the engine is started. If the oil pressure warning light stays on while the engine is running, there is a serious malfunction. If this happens, stop the car as soon as it is safe to do so, turn off the engine and check the oil level. If the oil level is low, fill the engine oil to the proper level and start the engine again. If the light stays on with the engine running, turn the engine off immediately. In any instance where the oil light stays on when the engine is running, the engine should be checked by a Hyundai dealer before the car is driven again. ! CAUTION: If you suspect brake trouble, have your brakes checked by a Hyundai dealer as soon as possible. Driving your car with a problem in either the brake electrical system or brake hydraulic system is dangerous, and could result in serious injury or death. Warning Light Operation The parking brake/brake fluid level warning light should come on when the parking brake is applied and the ignition switch is turned to "ON" or "START". After the engine is started, the light should go out when the parking brake is released. If the parking brake is not applied, the warning light should come on when the ignition switch is turned to "ON" or "START", then go out when the engine starts.