2010 Hyundai Elantra Owner's Manual - Page 281

Maintenance Manual transaxle fluid (if equipped) Inspect the manual transaxle fluid according to the maintenance schedule. Brake fluid Check brake fluid level in the brake fluid reservoir. The level should be between "MIN" and "MAX" marks on the side of the reservoir. Use only hydraulic brake fluid conforming to DOT 3 or DOT 4 specification. Suspension mounting bolts Check the suspension connections for looseness or damage. Retighten to the specified torque. ✽ NOTICE If the oil level is low, check for possible leaks before adding oil. Do not overfill. Steering gear box, linkage & boots/lower arm ball joint With the vehicle stopped and engine off, check for excessive free-play in the steering wheel. Check the linkage for bends or damage. Check the dust boots and ball joints for deterioration, cracks, or damage. Replace any damaged parts. Automatic transaxle fluid (if equipped) The fluid level should be in the "HOT" range of the dipstick, after the engine and transaxle are at normal operating temperature. Check the automatic transaxle fluid level with the engine running and the transaxle in neutral, with the parking brake properly applied. Rear disc brake / linings, parking brake Check the rear disc brake and linings for scoring, burning, leaking fluid, broken parts, and excessive wear. Inspect the parking brake system including the parking brake lever and cables. Brake pads, calipers and rotors Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage. Drive shafts and boots Check the drive shafts, boots and clamps for cracks, deterioration, or damage. Replace any damaged parts and, if necessary, repack the grease. Brake hoses and lines Visually check for proper installation, chafing, cracks, deterioration and any leakage. Replace any deteriorated or damaged parts immediately. Exhaust pipe and muffler Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration, or damage. Start the engine and listen carefully for any exhaust gas leakage. Tighten connections or replace parts as necessary. Air conditioning refrigerant (if equipped) Check the air conditioning lines and connections for leakage and damage. 7 14