2010 Hyundai Sonata Owner's Manual - Page 195

3 WHAT TO DO IN AN EMERGENCY 14 D060H02O-AAT D060I01E-AAT 7. Reinstall Wheel Nuts 8. Lower Vehicle and Tighten Nuts HNF4013-A D060H01NF-A 7D060I01NF To reinstall the wheel, hold it on the studs, put the wheel nuts on the studs and tighten them finger tight. The nuts should be installed with their small diameter ends directed inward. Jiggle the tire to be sure it is completely seated, then tighten the nuts as much as possible with your fingers again. Lower the car to the ground by turning the wheel nut wrench counterclockwise. Then position the wrench as shown in the drawing and tighten the wheel nuts. Be sure the socket is seated completely over the nut. Do not stand on the wrench handle or use an extension pipe over the wrench handle. Go around the wheel tightening every other nut until they are all tight. Then double-check each nut for tightness. After changing wheels, have a technician tighten the wheel nuts to their proper torque as soon as possible.