2010 Hyundai Sonata Owner's Manual - Page 38

FEATURES OF YOUR HYUNDAI 1 25 Release the button to lock the anchor into position. Try sliding the height adjuster to make sure that it has locked into position. B180A02NF-AAT SEAT BELT-Driver's 3-Point System with Emergency Locking Retractor To Fasten Your Belt NOTE: o If you are not able to pull out the seat belt from the retractor, firmly pull the belt out and release it. Then you will be able to pull the belt out smoothly. o If the driver's seat belt is not fastened when the ignition key is turned from the "OFF" position to the "ON" or "START" position, the seat belt warning light will blink and the warning chime will sound for approximately six seconds to remind the driver to fasten the driver's seat belt. ! WARNING: o Adjust the shoulder belt height when you sit well back in the seat. o When adjusting the shoulder belt height, grip the height adjuster button securely and slide the height adjuster up or down. ! WARNING: o Verify the shoulder belt anchor is locked into position at the appropriate height. Never position the shoulder belt across your neck or face. Improperly positioned seat belts can cause serious injuries in an accident. o Failure to replace seat belts after an accident could leave you with damaged seat belts that will not provide protection in the event of another collision leading to personal injury or death. Replace your seat belts after being in an accident as soon as possible. B180A01NF To fasten your seat belt, pull it out of the retractor and insert the metal tab into the buckle. There will be an audible "click" when the tab locks into the buckle. The seat belt automatically adjusts to the proper length only after the lap belt portion is adjusted manually so that it fits snugly around your hips. If you lean forward in a slow, easy motion, the belt will extend and let you move around. If there is a sudden stop or impact, however, the belt will lock into position. It will also lock if you try to lean forward too quickly.