2010 Hyundai Sonata Owner's Manual - Page 44

FEATURES OF YOUR HYUNDAI 1 31 ! WARNING: Lower Anchor Lower Anchor Position Indicator o When using the vehicle's "LATCH" system to install a child restraint system in the rear seat, all unused vehicle rear seat belt metal latch plates or tabs must be latched securely in their seat belt buckles and the seat belt webbing must be retracted behind the child restraint to prevent the child from reaching and taking hold of unretracted seat belts. Unlatched metal latch plates or tabs may allow the child to reach the unretracted seat belts which may result in strangulation and a serious injury or death to the child in the child restraint. Follow the child seat manufacturer's instructions to properly install safety seats with LATCH or LATCH-compatible attachments. Once you have installed the LATCH child restraint seat, assure that the seat is properly attached to the LATCH and tether anchors. Also, test the safety seat before you place the child in it. Tilt the seat from side to side. Also try to tug the seat forward. Check to see if the anchors hold the seat in place. B230D02NF Child restraint symbols are located on the left and right rear seatbacks to indicate the position of the lower anchors for child restraints. ! CAUTION: Do not allow the rear seat belt webbing to get scratched or pinched by the childseat latch and LATCH anchor during the installation. ! WARNING: B230D03NF A child can be seriously injured or killed in a collision if the child restraint is not properly anchored to the car and the child is not properly restrained in the child restraint. Always follow the child seat manufacturer's instructions for installation and use.