2012 Hyundai Elantra Owner's Manual - Page 348

Maintenance ✽ NOTICE If the headlight aiming adjustment is necessary after the headlight assembly is reinstalled, consult an authorized HYUNDAI dealer. Low OMD070027N High OMD070028N 1. Open the hood. 2. Disconnect the negative battery cable. 3. Loosen the screws with a screwdriver. 4. Pull the headlight assembly out to the front of the vehicle. 5. Disconnect the power connector(s) from the back of the headlight assembly. Headlight bulb (low, high) 6. Remove the headlight bulb cover by turning it counterclockwise. 7. Disconnect the headlight bulb socketconnector. 8. Unsnap the headlight bulb retaining wire by depressing the end and pushing it upward. 9. Remove the bulb from the headlight assembly. 10. Install a new headlight bulb and snap the headlight bulb retaining wire into position by aligning the wire with the groove on the bulb. 11. Connect the headlight bulb socketconnector. 12. Install the headlight bulb cover by turning it clockwise. 7 60