2012 Hyundai Elantra Owner's Manual - Page 351

Maintenance Tail light Stop/Tail OMD070033 Turn signal OMD070035N Tail light 5. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 6. Remove the bulb by pulling it out. 7. Inset a new bulb by insetring it into the socket. 8. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise. OMD070034 3. Loosen the assembly retaining nuts. 4. Remove the rear combination light assembly from the body of the vehicle. Stop/Tail light and turn signal light 5. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 6. Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket. 7. Insert a new bulb by inserting it into the socket and rotating it until it locks into place. 8. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise. 7 63