2012 Hyundai Elantra Owner's Manual - Page 94

Features of your vehicle Using the transmitter (if equipped) Park the vehicle and stop the engine. Arm the system as described below. 1. Turn off the engine and remove the ignition key from the ignition switch. 2. Make sure that all doors, the engine hood and trunk lid are closed and latched. 3. Lock the doors by pressing the lock button on the transmitter. After completion of the steps above, the hazard warning lights will blink once to indicate that the system is armed. If the lock button is pressed once more within 4 seconds, hazard warning lights blink and the horn sounds once to confirm that the system is armed. If any door, trunk lid or engine hood remains open, the hazard warning lights (or/and horn) won't operate and theftalarm will not arm. After you close all doors, trunk lid and engine hood, the hazard warning lights blink once. Using the mechanical key Park the vehicle and stop the engine. Arm the system as described below. 1. Turn off the engine and remove the key from the ignition switch(if equipped). 2. Make sure that all doors, the engine hood and trunk lid are closed and latched. 3. Lock the doors by inserting the key into the key hole on the front outside door handle and turning the key toward the front of the vehicle. If any door, trunk lid or engine hood remains open, the theft-alarm will not arm. Do not arm the system until all passengers have left the vehicle. If the system is armed while a passenger(s) remains in the vehicle, the alarm may be activated when the remaining passenger(s) leave the vehicle. If any door (or trunk) or engine hood is opened within 30 seconds after the system enters the armed stage, the system is disarmed to prevent an unnecessary alarm. ✽ NOTICE If you lock or unlock the doors by using the mechanical key, the hazard warning light won't operate. 4 16