2012 Hyundai Tucson Owner's Manual - Page 348

Maintenance 5. Remove the bulb from the headlight assembly. 6. Install a new headlight bulb and snap the headlight bulb retaining wire into position by aligning the wire with the groove on the bulb. 7. Connect the headlight bulb socketconnector. 8. Install the headlight bulb cover by turning it clockwise. 3. Insert a new bulb by inserting it into the socket and rotating it until it locks into place. 4. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise. Front fog light bulbs (if equipped) If the light bulb is not operating, have the vehicle checked by an authorized HYUNDAI dealer. OLM079046 Turn signal light/Position light 1. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 2. Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket 7 61