2013 Hyundai Genesis Coupe Owner's Manual - Page 180

Features of your vehicle WINDSHIELD DEFROSTING AND DEFOGGING D250000AEN WARNING - Windshield heating Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility could cause an accident resulting in serious injury or death. In this case, set the mode selection knob or button to the position and fan speed control knob or button to a lower speed. • For maximum defrosting, set the temperature control to the extreme right/hot position and the fan speed control to the highest speed. • If warm air to the floor is desired while defrosting or defogging, set the mode to the floor-defrost position. • Before driving, clear all snow and ice from the windshield, rear window, outside rear view mirrors, and all side windows. • Clear all snow and ice from the hood and air inlet in the cowl grill to improve heater and defroster efficiency and to reduce the probability of fogging up the inside of the windshield. OBH049103 D250201AEN-EU ✽ NOTICE If the engine temperature is still cold after starting, then a brief engine warm up period may be required for the vented air flow to become warm or hot. To defog inside windshield 1. Select desired fan speed. 2. Select desired temperature. 3. Press the defrost button ( ). 4. The outside (fresh) air position will be selected automatically. If the outside (fresh) air position is not selected automatically, adjust the corresponding button manually. If the position is selected, lower fan speed is adjusted to a higher fan speed. 4 101