2013 Hyundai Sonata Owner's Manual - Page 368

Maintenance ✽ NOTICE 3. Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel. 4. Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized HYUNDAI dealer. If the multi fuse is blown, consult an authorized HYUNDAI dealer. CAUTION After checking the fuse panel in the engine compartment, securely install the fuse panel cover. If not, electrical failures may occur from water contact. OYF079024 Multi fuse If the multi fuse is blown, it must be removed as follows: 1. Turn off the engine. 2. Disconnect the negative battery cable. 3. Remove the fuse panel on the right side in the engine compartment. 4. Remove the nuts shown in the picture above. 5. Replace the fuse with a new one of the same rating. 6. Reinstall in the reverse order of removal. 7 53