2006 Infiniti FX35 Owner's Manual - Page 228

IGNITION SWITCH (except Intelligent Key system) When a wheel is off the ground due to an unlevel surface, do not spin the wheel excessively. (AWD models) When the vehicle is on a free roller or the front or rear wheels are jacked up, do not start the engine. The vehicle could lurch forward. (AWD models) 1. Move the selector lever into the P (Park) position. 2. Turn the ignition key slightly in the ON direction. 3. Turn the key toward the LOCK position. 4. Remove the key. If the key is removed from the ignition switch, the selector lever cannot be moved from P (Park) position. The selector lever can be moved if the ignition switch is in the ON position and the foot brake pedal is depressed. SSD0392 The ignition lock is designed so that the key cannot be turned to LOCK and removed until the selector lever is moved to the P (Park) position. When removing the key from the ignition, make sure the selector lever is in the P (Park) position. If the selector lever is not returned to P (Park) position, the key cannot be moved toward LOCK. When the key cannot be turned toward the LOCK position, proceed as follows to remove the key: There is an OFF position 1 in between LOCK and ACC, although it does not show on the lock cylinder. When the ignition is in OFF the steering wheel is not locked. In order for the steering wheel to be locked, it must be turned about 1/6 of a turn clockwise from the straight up position. To lock the steering wheel, turn the key to the LOCK position. Remove the key. To unlock the steering wheel, insert the key and turn it gently while rotating the steering wheel slightly right and left. 5-10 Starting and driving