2006 Infiniti FX35 Owner's Manual - Page 83

When using the remote keyless entry, the hazard indicators will operate as shown in "Remote keyless entry system" or "Intelligent Key system" in the "3. Pre-driving checks and adjustments" section. 4. Confirm that the SECURITY indicator light A comes on. The SECURITY indicator light A glows for about 30 seconds and then blinks. The system is now activated. If, during this 30 second time period, the door is unlocked by the key or the remote keyless entry, or the ignition key is turned to ACC or ON, the system will not be armed. Even when the driver and/or passengers are in the vehicle, the system will activate with all doors and the hood locked and ignition key off. Turn the ignition key to ACC to turn the system off. Vehicle security system activation The security system will give the following alarm: The headlights blink and the horn sounds intermittently. The alarm automatically turns off after approximately 1 minute. However, the alarm reactivates if the vehicle is tampered with again. The alarm can be shut off by unlocking a door with the key, or by pressing the UNLOCK button on the electronic ignition key. The alarm is activated by: Opening the door without using the key or remote keyless entry. Opening the lift gate without using the key or remote keyless entry. Opening the hood. SIC2153 How to arm the vehicle security system 1. Close all windows. The system can be armed even if the windows are open. 2. Remove the key from the ignition switch. 3. Close and lock all doors and the hood. Lock all doors by pushing the lock button on the keyfob, Intelligent Key or the front door handle request switch or by using the key. How to stop an activated alarm The alarm will stop only by unlocking a door with the key, by pressing the door handle request switch or by pressing the UNLOCK button on the keyfob or Intelligent Key. The alarm will not stop if the ignition switch is turned to ACC or ON. Instruments and controls 2-19