2007 Infiniti M35 Owner's Manual - Page 182
2007 Infiniti M35 Manual
Page 182 highlights
Heating (A/C OFF) The air conditioner does not activate in this mode. When you need to heat only, use this mode. 1. Push the "A/C" button. (The A/C indicator will turn off.) 2. Push the temperature control button to set the desired temperature. The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed are also controlled automatically. Do not set the temperature lower than the outside air temperature. Otherwise the system may not work properly. Not recommended if windows fog up. of the windows, push the fan speed +" and set it to increase button " the maximum position. As soon as possible after the windshield is clean, push the "AUTO" button to return to the auto mode. When the " " front defroster button is pushed, the air conditioner will automatically be turned on at outside temperatures above 23°F (−5°C) to defog the windshield, and the air recirculate mode will automatically be turned off. Outside air is drawn into the passenger compartment to improve the defogging performance. side the vehicle. The indicator light on the " side will come on. " The air recirculation mode cannot be activated when the air conditioner is in the ". front defrosting mode " Outside air circulation Push the intake air control button " " to draw outside air into the passenger compartment. The indicator light on the " " side will come on. Automatic intake air control In the AUTO mode, the intake air will be controlled automatically. To manually control the intake air, push the intake air control button " ". To return to the automatic control mode, push the intake air control button " " for about 2 seconds. The indicator lights (both air recirculation and outside air circulation sides) will flash twice, and then the intake air will be controlled automatically. MANUAL OPERATION Fan speed control Push the fan speed increase " +" or decrease " " buttons to manually control the fan speed. Push the "AUTO" button to return to automatic control of the fan speed. Dehumidified defrosting or defogging 1. Push the " " front defroster button. (The indicator light on the button will come on.) 2. Push the temperature control button to set the desired temperature. To quickly remove ice from the outside Air recirculation Push " the intake air control button " to recirculate interior air in- Air flow control Pushing the "MODE" manual air flow control button selects the air outlet to: 4-26 Monitor, climate, audio, phone and voice recognition systems