2007 Infiniti M35 Owner's Manual - Page 283

- Winding or hilly roads may cause the sensor to temporarily not detect a vehicle in the same lane or may detect objects or vehicles in other lanes. - Vehicle position in the lane may cause the sensor to temporarily not detect a vehicle in the same lane or may detect objects or vehicles in other lanes. When the Preview Function operates, the brake pedal may move slightly and may make a small noise. This is not a system malfunction. conditions, have the vehicle checked at an INFINITI dealer. How to handle the sensor The sensor for the Preview Function is common with Intelligent Cruise Control and is located below the front bumper. To keep the Preview Function operating properly, be sure to observe the following: Always keep the sensor clean. Wipe with a soft cloth carefully so as not to damage the sensor. Do not strike or damage the areas around the sensor. Do not touch or remove the screw located on the sensor. Doing so could cause failure or malfunction. If the sensor is damaged due to an accident, contact an INFINITI dealer. Do not attach a sticker (including transparent material) or install an accessory near the sensor. This could cause failure or malfunction. SSD0471 Warning light and display When the Preview Function is not operating properly, the buzzer sounds and the system warning light (Orange) will come on. Action to take: If the warning light comes on, park the vehicle in a safe place. Turn the engine off, restart the engine and resume driving. If the indicator stays on, it may indicate that the Preview Function is malfunctioning (the brake is operative). Although the Vehicle is still driveable under normal Starting and driving 5-49