2007 Infiniti M35 Owner's Manual - Page 91

INDICATORS FOR OPERATION 1. Engine start operation indicator (ignition switch in the LOCK or ACC position) This indicator appears when the ignition switch is in the LOCK or ACC position with the selector lever in the "P" position. This indicator means that the engine will start by pushing the ignition switch with the brake pedal depressed. If this indicator appears, push the pushbutton ignition switch while lightly turning the steering wheel right and left. 6. NO KEY warning This warning appears when the door is closed with the Intelligent Key left outside the vehicle and the ignition switch in the ACC or ON position. If this warning appears, make sure the Intelligent Key is returned to the inside of the vehicle. When all the doors are closed, an outside chime and inside warning chime will also sound. See "Intelligent Key system" in the "3. Pre-driving checks and adjustments" section. 4. Intelligent Key insertion indicator This indicator appears when the Intelligent Key needs to be inserted into the Intelligent Key port. (For example, the Intelligent Key battery is discharged.) If this indicator appears, insert the Intelligent Key into the Intelligent Key port in the correct direction. See "Push-button ignition switch" in the "5. Starting and driving" section. 2. Engine start operation indicator (ignition switch in the ON position) This indicator appears when the ignition switch is in the ON position with the selector lever in the "P" position. This indicator means that the engine will start by pushing the ignition switch with the brake pedal depressed. 5. Intelligent Key removal indicator This indicator appears when the driver's door is opened with the ignition switch in the LOCK position and the Intelligent Key placed in the Intelligent Key port. A key reminder chime also sounds. If this indicator appears, remove the Intelligent Key from the Intelligent Key port and take it with you when leaving the vehicle. 7. SHIFT "P" warning This warning appears when the ignition switch is pushed to stop the engine with the selector lever in any position except the P position. If this warning appears, the ignition switch is in the ACC position instead of the LOCK position. Move the selector lever to the "P" position or push the ignition switch to the ON position. An inside warning chime will also sound. See "Intelligent Key system" in the "3. Pre-driving checks and adjustments" section. 3. Steering lock release malfunction indicator This indicator appears when the steering wheel cannot be released from the LOCK position. Instruments and controls 2-21