2008 Jeep Commander Owner Manual - Page 85

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 Help Command If you need assistance at any prompt, or if you want to know your options at any prompt, say ЉHelpЉ following the beep. The UConnect™ system will play all the options at any prompt if you ask for help. To activate the UConnect™ system from idle, simply press the "Phone" button and follow audible prompts for directions. All UConnect™ system sessions begin with a press of the "Phone" button on the radio control head. Cancel Command At any prompt, after the beep, you can say ЉCancelЉ and you will be returned to the main menu. However, in a few instances the system will take you back to the previous menu. Pair (Link) UConnect™ System to a Cellular Phone To begin using your UConnect™ system, you must pair your compatible Bluetooth™ enabled cellular phone. To complete the pairing process, you will need to reference your cellular phone owner's manual. The UConnect™ website may also provide detailed instructions for pairing. The following are general phone to UConnect™ System pairing instructions: • Press the "Phone" button to begin. • After the ЉReadyЉ prompt and the following beep, say ЉSetup Phone Pairing.Љ • When prompted, after the beep, say ЉPair a PhoneЉ and follow the audible prompts. • You will be asked to say a four-digit pin number, which you will later need to enter into your cellular. You can enter any four-digit pin number. You will not need to remember this pin number after the initial pairing process. 3