2008 Jeep Patriot Owner's Manual - Page 24

22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Turn Off "Flash Lights With Lock" NOTE: The "Flash Lights With Lock" feature can be turned on or off. On EVIC equipped vehicles refer to Personal Settings under "Electronic Vehicle Information Center (EVIC)" in Section 4. For vehicles not equipped with an EVIC, perform the following steps: 1. Press the UNLOCK button for four to 10 seconds. 2. While the UNLOCK button is pressed (after four seconds), press the LOCK button. Release both buttons. 3. Test the "flash lights" with LOCK feature, while outside of the vehicle, by pressing the LOCK button on the RKE transmitter with the ignition in the LOCK position and the key removed. NOTE: Pressing the LOCK button on the RKE transmitter while you are in the vehicle, will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm. The "Flash Lights With Lock" feature can be reactivated by repeating this procedure. Programming Additional Transmitters Vehicles are shipped from the assembly plants with two RKE transmitter programmed only for that vehicle. A total of eight RKE transmitter can be programmed for your vehicle. Additional RKE transmitter can be programmed to your vehicle through the use of a currently programmed RKE transmitter. NOTE: When entering program mode using that RKE transmitter, all other programmed RKE transmitters will be erased and you will have to reprogram them for your vehicle.