2008 Jeep Patriot Owner's Manual - Page 25

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Use the following procedure to program additional RKE transmitters if the vehicle is not equipped with Sentry Key : 1. Enter your vehicle and close all doors. 2. Fasten your seat belt (fastening the seat belt will cancel any chiming that may confuse you during this programming procedure). 3. Place the key into the ignition. 4. Turn the ignition to the ON position. Do not start the engine. 5. Press and hold the UNLOCK button on the RKE transmitter. 6. After holding the UNLOCK button for four seconds, also press the PANIC button within six seconds. 7. When a single chime is heard, release both buttons. The chime is an indication that you have successfully entered program mode. All RKE transmitters that are to be programmed must be done so within 60 seconds of when the chime is heard. 8. Using the RKE transmitter to be programmed, press and release both the LOCK and UNLOCK buttons simultaneously. 9. A single chime will be heard. 10. Within four seconds of hearing the chime, press and release the UNLOCK button on the RKE transmitter. 11. A single chime will be heard. 12. Repeat steps 8 through 10 to program up to six additional RKE transmitters. 13. Turn the ignition to the OFF position. 2